Testing of storage products typically requires the following instruments and equipment:
1. Universal testing machine: used to test the product's compressive, tensile, and flexural mechanical properties.
2. Friction and wear testing machine: to evaluate the product's abrasion resistance.
3. Gas chromatography-mass spectrometry (GC-MS): to detect the content of harmful chemicals.
4. X-ray fluorescence spectrometry (XRF): for rapid analysis of heavy metal components in materials.
5. Environmental testing chamber: to simulate environmental conditions such as high temperature, low temperature, and humidity to test the product's weather resistance.
6. Impact testing machine: to evaluate the product's impact resistance.
7. Microscope and calipers: used to inspect the product's surface defects and dimensional accuracy.
The testing process for storage products typically includes the following steps:
1. Sample preparation: randomly selecting representative samples from a batch of products to ensure the reliability of the test results.
2. Physical performance testing: conducting load-bearing capacity, abrasion resistance, and impact resistance tests according to standard methods and recording the data.
3. Chemical analysis: using equipment such as GC-MS and XRF to detect the content of harmful substances.
4. Structural safety assessment: Check whether the product design meets ergonomic and safety requirements.
5. Environmental simulation testing: Place the product under different temperature and humidity conditions and observe its performance changes.
6. Data analysis and reporting: Summarize the test data, evaluate it against relevant standards, and generate a test report.